dmesg - ThinkPad T410s
microcode: microcode updated early to revision 0x7, date = 2018-04-23
Linux version 5.3.0-62-generic (buildd@lcy01-amd64-004) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #56~18.04.1-Ubuntu SMP Wed Jun 24 16:17:03 UTC 2020 (Ubuntu 5.3.0-62.56~18.04.1-generic 5.3.18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf27bfff] usable
BIOS-e820: [mem 0x00000000bf27c000-0x00000000bf281fff] reserved
BIOS-e820: [mem 0x00000000bf282000-0x00000000bf35efff] usable
BIOS-e820: [mem 0x00000000bf35f000-0x00000000bf370fff] reserved
BIOS-e820: [mem 0x00000000bf371000-0x00000000bf3f1fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf3f2000-0x00000000bf40efff] reserved
BIOS-e820: [mem 0x00000000bf40f000-0x00000000bf46efff] usable
BIOS-e820: [mem 0x00000000bf46f000-0x00000000bf667fff] reserved
BIOS-e820: [mem 0x00000000bf668000-0x00000000bf6e7fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf6e8000-0x00000000bf70efff] reserved
BIOS-e820: [mem 0x00000000bf70f000-0x00000000bf716fff] usable
BIOS-e820: [mem 0x00000000bf717000-0x00000000bf71efff] reserved
BIOS-e820: [mem 0x00000000bf71f000-0x00000000bf76afff] usable
BIOS-e820: [mem 0x00000000bf76b000-0x00000000bf776fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf777000-0x00000000bf779fff] ACPI data
BIOS-e820: [mem 0x00000000bf77a000-0x00000000bf780fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf781000-0x00000000bf781fff] ACPI data
BIOS-e820: [mem 0x00000000bf782000-0x00000000bf78afff] ACPI NVS
BIOS-e820: [mem 0x00000000bf78b000-0x00000000bf78bfff] ACPI data
BIOS-e820: [mem 0x00000000bf78c000-0x00000000bf79efff] ACPI NVS
BIOS-e820: [mem 0x00000000bf79f000-0x00000000bf7fefff] ACPI data
BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
BIOS-e820: [mem 0x0000000200000000-0x000000023bffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: LENOVO 2924BV6/2924BV6, BIOS 6UET70WW (1.50 ) 10/11/2012
tsc: Fast TSC calibration using PIT
tsc: Detected 2527.170 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x23c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 disabled
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask FC0000000 write-back
5 base 23C000000 mask FFC000000 uncachable
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 8128M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 5 lose cover RAM: 0G
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f68e0-0x000f68ef]
check: Scanning 1 areas for low memory corruption
BRK [0x181401000, 0x181401fff] PGTABLE
BRK [0x181402000, 0x181402fff] PGTABLE
BRK [0x181403000, 0x181403fff] PGTABLE
BRK [0x181404000, 0x181404fff] PGTABLE
BRK [0x181405000, 0x181405fff] PGTABLE
BRK [0x181406000, 0x181406fff] PGTABLE
BRK [0x181407000, 0x181407fff] PGTABLE
BRK [0x181408000, 0x181408fff] PGTABLE
BRK [0x181409000, 0x181409fff] PGTABLE
BRK [0x18140a000, 0x18140afff] PGTABLE
RAMDISK: [mem 0x2fd9f000-0x33ec6fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F68A0 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BF7EF1FE 00009C (v01 LENOVO TP-6U 00001500 LTP 00000000)
ACPI: FACP 0x00000000BF7EF300 0000F4 (v04 LENOVO TP-6U 00001500 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20190703/tbfadt-569)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20190703/tbfadt-674)
ACPI: DSDT 0x00000000BF7EF6D1 00F432 (v01 LENOVO TP-6U 00001500 MSFT 03000001)
ACPI: FACS 0x00000000BF6E7000 000040
ACPI: FACS 0x00000000BF6E7000 000040
ACPI: SSDT 0x00000000BF7EF4B4 00021D (v01 LENOVO TP-6U 00001500 MSFT 03000001)
ACPI: ECDT 0x00000000BF7FEB03 000052 (v01 LENOVO TP-6U 00001500 LNVO 00000001)
ACPI: APIC 0x00000000BF7FEB55 000084 (v01 LENOVO TP-6U 00001500 LNVO 00000001)
ACPI: MCFG 0x00000000BF7FEC11 00003C (v01 LENOVO TP-6U 00001500 LNVO 00000001)
ACPI: HPET 0x00000000BF7FEC4D 000038 (v01 LENOVO TP-6U 00001500 LNVO 00000001)
ACPI: ASF! 0x00000000BF7FEDBE 0000A4 (v16 LENOVO TP-6U 00001500 PTL 00000001)
ACPI: SLIC 0x00000000BF7FEE62 000176 (v01 LENOVO TP-6U 00001500 LTP 00000000)
ACPI: BOOT 0x00000000BF7FEFD8 000028 (v01 LENOVO TP-6U 00001500 LTP 00000001)
ACPI: SSDT 0x00000000BF6E591A 00084B (v01 LENOVO TP-6U 00001500 INTL 20050513)
ACPI: TCPA 0x00000000BF78B000 000032 (v02 PTL CRESTLN 06040000 00005A52)
ACPI: DMAR 0x00000000BF781000 000080 (v01 INTEL CP_DALE 00000001 INTL 00000001)
ACPI: SSDT 0x00000000BF779000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: SSDT 0x00000000BF778000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
ACPI: SSDT 0x00000000BF777000 00049F (v01 PmRef ApTst 00003000 INTL 20060912)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023bffffff]
NODE_DATA(0) allocated [mem 0x23bfd1000-0x23bffbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023bffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000bf27bfff]
node 0: [mem 0x00000000bf282000-0x00000000bf35efff]
node 0: [mem 0x00000000bf40f000-0x00000000bf46efff]
node 0: [mem 0x00000000bf70f000-0x00000000bf716fff]
node 0: [mem 0x00000000bf71f000-0x00000000bf76afff]
node 0: [mem 0x00000000bf7ff000-0x00000000bf7fffff]
node 0: [mem 0x0000000100000000-0x00000001fbffffff]
node 0: [mem 0x0000000200000000-0x000000023bffffff]
Zeroed struct page in unavailable ranges: 35925 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000023bffffff]
On node 0 totalpages: 2061227
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12177 pages used for memmap
DMA32 zone: 779278 pages, LIFO batch:63
Normal zone: 20224 pages used for memmap
Normal zone: 1277952 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
PM: Registered nosave memory: [mem 0xbf27c000-0xbf281fff]
PM: Registered nosave memory: [mem 0xbf35f000-0xbf370fff]
PM: Registered nosave memory: [mem 0xbf371000-0xbf3f1fff]
PM: Registered nosave memory: [mem 0xbf3f2000-0xbf40efff]
PM: Registered nosave memory: [mem 0xbf46f000-0xbf667fff]
PM: Registered nosave memory: [mem 0xbf668000-0xbf6e7fff]
PM: Registered nosave memory: [mem 0xbf6e8000-0xbf70efff]
PM: Registered nosave memory: [mem 0xbf717000-0xbf71efff]
PM: Registered nosave memory: [mem 0xbf76b000-0xbf776fff]
PM: Registered nosave memory: [mem 0xbf777000-0xbf779fff]
PM: Registered nosave memory: [mem 0xbf77a000-0xbf780fff]
PM: Registered nosave memory: [mem 0xbf781000-0xbf781fff]
PM: Registered nosave memory: [mem 0xbf782000-0xbf78afff]
PM: Registered nosave memory: [mem 0xbf78b000-0xbf78bfff]
PM: Registered nosave memory: [mem 0xbf78c000-0xbf79efff]
PM: Registered nosave memory: [mem 0xbf79f000-0xbf7fefff]
PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafefff]
PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 2028741
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7934680K/8244908K available (14339K kernel code, 2369K rwdata, 4672K rodata, 2664K init, 5072K bss, 310228K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x41/0x550 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 43329 entries in 170 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190703
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
DMAR: DRHD base: 0x000000fed93000 flags: 0x1
DMAR: dmar1: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
DMAR: RMRR base: 0x000000bf6e9000 end: 0x000000bf6fffff
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x246d7c09238, max_idle_ns: 440795211535 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.34 BogoMIPS (lpj=10108680)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz (family: 0x6, model: 0x25, stepping: 0x5)
Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
core: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
MDS CPU bug present and SMT on, data leak possible. See for more details.
#2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (20217.36 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbf371000-0xbf3f1fff] (528384 bytes)
PM: Registering ACPI NVS region [mem 0xbf668000-0xbf6e7fff] (524288 bytes)
PM: Registering ACPI NVS region [mem 0xbf76b000-0xbf776fff] (49152 bytes)
PM: Registering ACPI NVS region [mem 0xbf77a000-0xbf780fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xbf782000-0xbf78afff] (36864 bytes)
PM: Registering ACPI NVS region [mem 0xbf78c000-0xbf79efff] (77824 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 13:28:41, date: 2020-07-13
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1594646921.144:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x35 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \: Used as first EC
ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: Boot ECDT EC used to handle transactions
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF949832135000 0004B1 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF949832133000 0006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9498323ED400 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF94983219A600 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI: Power Resource [PUBS] (on)
acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
pci 0000:00:00.0: DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf2327800-0xf232780f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf2300000-0xf231ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf2325000-0xf2325fff]
pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf2328000-0xf23283ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3b57] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf2320000-0xf2323fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf2328400-0xf23287ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b0f] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x1818-0x181f]
pci 0000:00:1f.2: reg 0x14: [io 0x180c-0x180f]
pci 0000:00:1f.2: reg 0x18: [io 0x1810-0x1817]
pci 0000:00:1f.2: reg 0x1c: [io 0x1808-0x180b]
pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf2327000-0xf23277ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf2328800-0xf23288ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x1860-0x187f]
pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xf2326000-0xf2326fff 64bit]
pci 0000:01:00.0: [10de:0a6c] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xcc000000-0xccffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 64.000 Gb/s with 5 GT/s x16 link)
pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xcdefc000-0xcdefffff]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:4239] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf2000000-0xf2001fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
pci 0000:05:00.0: [1180:e822] type 00 class 0x080500
pci 0000:05:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:05:00.0: reg 0x10: [mem 0xf1f00000-0xf1f000ff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 05-0c]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:1c.4: bridge window [mem 0xf2400000-0xf24fffff 64bit pref]
pci_bus 0000:0e: extended config space not accessible
pci 0000:00:1e.0: PCI bridge to [bus 0e] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC_.EC__: Boot DSDT EC used to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf27c000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf35f000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf46f000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf717000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf76b000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1180-0x11ff] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x1641] has been reserved
system 00:01: [io 0x1644-0x167f] could not be reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfeaff000-0xfeafffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
pnp: PnP ACPI: found 5 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
pci 0000:00:1c.4: PCI bridge to [bus 05-0c]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:1c.4: bridge window [mem 0xf2400000-0xf24fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0e]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff]
pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
pci_bus 0000:05: resource 2 [mem 0xf2400000-0xf24fffff 64bit pref]
pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0e: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:0e: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:0e: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:0e: resource 10 [mem 0xc0000000-0xfebfffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 66720K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xbb27c000-0xbf27c000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 1280x800x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xcf000000, mapped to 0x(____ptrval____), using 4032k, total 4032k
fbcon: Deferring console take-over
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (57 C)
Linux agpgart interface v0.103
battery: ACPI: Battery Slot [BAT0] (battery present)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xf2328000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.3.0-62-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 19, io mem 0xf2328400
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.3.0-62-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: CPU model not supported
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x20655, pf=0x10, revision=0x7
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1449295221, 262766)->(1531337481, -81779494)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 5b6b7609e44461836628aa165e1ec77cc1a3cfd6'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 12:287:483
rtc_cmos 00:02: setting system clock to 2020-07-13T13:28:42 UTC (1594646922)
random: fast init done
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2664K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1472K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
acpi device:0b: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input5
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
sdhci-pci 0000:05:00.0: SDHCI controller found [1180:e822] (rev 1)
sdhci-pci 0000:05:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
mmc0: SDHCI controller on PCI [0000:05:00.0] using DMA
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf2327000 port 0xf2327100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xf2327000 port 0xf2327180 irq 29
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf2327000 port 0xf2327300 irq 29
ata6: SATA max UDMA/133 abar m2048@0xf2327000 port 0xf2327380 irq 29
MXM: GUID detected in BIOS
ACPI Warning: \_SB.PCI0.PEG.VID._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190703/nsarguments-66)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG_.VID_ handle
checking generic (cf000000 3f0000) vs hw (d0000000 10000000)
checking generic (cf000000 3f0000) vs hw (ce000000 2000000)
fb0: switching to nouveaufb from VESA VGA
nouveau 0000:01:00.0: NVIDIA GT218 (0a8600b1)
usb 1-1: new high-speed USB device number 2 using ehci-pci
nouveau 0000:01:00.0: bios: version 70.18.87.00.00
nouveau 0000:01:00.0: fb: 512 MiB DDR3
usb 2-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:31:46:2d
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
e1000e 0000:00:19.0 enp0s25: renamed from eth0
[TTM] Zone kernel: Available graphics memory: 4004812 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:01:00.0: DRM: VRAM: 512 MiB
nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.0
nouveau 0000:01:00.0: DRM: DCB outp 00: 01800323 00010034
nouveau 0000:01:00.0: DRM: DCB outp 01: 02811300 00000000
nouveau 0000:01:00.0: DRM: DCB outp 02: 028223a6 0f220010
nouveau 0000:01:00.0: DRM: DCB outp 03: 02822362 00020010
nouveau 0000:01:00.0: DRM: DCB outp 04: 048333b6 0f220010
nouveau 0000:01:00.0: DRM: DCB outp 05: 04833372 00020010
nouveau 0000:01:00.0: DRM: DCB outp 06: 088443c6 0f220010
nouveau 0000:01:00.0: DRM: DCB outp 07: 08844382 00020010
nouveau 0000:01:00.0: DRM: DCB conn 00: 00000040
nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
nouveau 0000:01:00.0: DRM: DCB conn 02: 00101246
nouveau 0000:01:00.0: DRM: DCB conn 03: 00202346
nouveau 0000:01:00.0: DRM: DCB conn 04: 00410446
nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: TOSHIBA MK2533GSG, QS002E, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2533GS 2E PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
nouveau 0000:01:00.0: DRM: allocated 1440x900 fb: 0x70000, bo (____ptrval____)
fbcon: nouveaudrmfb (fb0) is primary device
fbcon: Deferring console take-over
nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1.2: new full-speed USB device number 3 using ehci-pci
usb 1-1.2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: USB Receiver
usb 1-1.2: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C534.0001/input/input7
tsc: Refined TSC clocksource calibration: 2527.003 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x246cde98eb2, max_idle_ns: 440795235729 ns
clocksource: Switched to clocksource tsc
hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/input/input8
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/input/input9
usb 1-1.3: new full-speed USB device number 4 using ehci-pci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata2.00: ATA-10: CT480BX500SSD1, M6CR022, max UDMA/133
ata2.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA CT480BX500SSD1 R022 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 sdb6 >
sd 1:0:0:0: [sdb] Attached SCSI disk
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/input/input10
hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1
psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016, bcdDevice= 0.02
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: Biometric Coprocessor
usb 1-1.3: Manufacturer: UPEK
logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
usb 1-1.4: new full-speed USB device number 5 using ehci-pci
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f, bcdDevice= 3.60
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Broadcom Bluetooth Device
usb 1-1.4: Manufacturer: Broadcom Corp
usb 1-1.4: SerialNumber: 889FFAF4B271
logitech-djreceiver 0003:046D:C534.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1
ata5: SATA link down (SStatus 0 SControl 300)
logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input14
hid-generic 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:1a.0-1.2/input1:2
usb 1-1.6: new high-speed USB device number 6 using ehci-pci
input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input18
logitech-hidpp-device 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:1a.0-1.2/input1:2
usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480d, bcdDevice=23.38
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: Integrated Camera
usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
ata6: SATA link down (SStatus 0 SControl 300)
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input13
raid6: sse2x4 gen() 9877 MB/s
raid6: sse2x4 xor() 7454 MB/s
raid6: sse2x2 gen() 8938 MB/s
raid6: sse2x2 xor() 6783 MB/s
raid6: sse2x1 gen() 7487 MB/s
raid6: sse2x1 xor() 5750 MB/s
raid6: using algorithm sse2x4 gen() 9877 MB/s
raid6: .... xor() 7454 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 15810.000 MB/sec
generic_sse: 13454.000 MB/sec
xor: using function: prefetch64-sse (15810.000 MB/sec)
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time.
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on fsck to fsckd communication Socket.
EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
vhba: loading out-of-tree module taints kernel.
vhba: module verification failed: signature and/or required key missing - tainting kernel
scsi host6: vhba
ip_local_port_range: prefer different parity for start/end values.
systemd-journald[433]: Received request to flush runtime journal from PID 1
systemd-journald[433]: File /var/log/journal/4905329f5c5a48488a5f0ec90619e821/system.journal corrupted or uncleanly shut down, renaming and replacing.
Adding 4095996k swap on /swapfile. Priority:-2 extents:1413 across:40103684k SSFS
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB.PCI0.LPC.PMIO) (20190703/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000011C0-0x00000000000011CF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB.PCI0.LPC.LPIO) (20190703/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB.PCI0.LPC.LPIO) (20190703/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB.PCI0.LPC.LPIO) (20190703/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
Non-volatile memory driver v1.3
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
thinkpad_acpi: ThinkPad ACPI Extras v0.26
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS 6UET70WW (1.50 ), EC 6UHT33WW-1.14
thinkpad_acpi: Lenovo ThinkPad T410s, model 2924BV6
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: battery 1 registered (start 0, stop 0)
battery: new extension: ThinkPad Battery Extension
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input19
snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing.
snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC0D0: inputs:
snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b
snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a
snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
cryptd: max_cpu_qlen set to 1000
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
SSE version of gcm_enc/dec engaged.
mc: Linux media interface: v0.10
usbcore: registered new interface driver btusb
videodev: Linux video capture interface: v2.00
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480d)
uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input24
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input26
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input27
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input28
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1594661485.663:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=903 comm="apparmor_parser"
audit: type=1400 audit(1594661485.663:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=903 comm="apparmor_parser"
audit: type=1400 audit(1594661485.663:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=903 comm="apparmor_parser"
audit: type=1400 audit(1594661485.671:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=900 comm="apparmor_parser"
audit: type=1400 audit(1594661485.671:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=900 comm="apparmor_parser"
audit: type=1400 audit(1594661485.671:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=900 comm="apparmor_parser"
audit: type=1400 audit(1594661485.671:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=900 comm="apparmor_parser"
audit: type=1400 audit(1594661485.671:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=899 comm="apparmor_parser"
audit: type=1400 audit(1594661485.671:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=899 comm="apparmor_parser"
audit: type=1400 audit(1594661485.683:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=910 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
input: lircd-uinput as /devices/virtual/input/input29
iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
aufs 4.x-rcN-20190805
iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2527003285 Hz
vboxdrv: Successfully loaded version 6.1.10 (interface 0x002d0001)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
wlp3s0: authenticate with 48:d3:43:c0:4e:c9
wlp3s0: send auth to 48:d3:43:c0:4e:c9 (try 1/3)
wlp3s0: authenticated
wlp3s0: waiting for beacon from 48:d3:43:c0:4e:c9
wlp3s0: associate with 48:d3:43:c0:4e:c9 (try 1/3)
wlp3s0: RX AssocResp from 48:d3:43:c0:4e:c9 (capab=0x431 status=0 aid=3)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3137 > 3131), lowering kernel.perf_event_max_sample_rate to 63750
wlp3s0: disassociated from 48:d3:43:c0:4e:c9 (Reason: 1=UNSPECIFIED)
wlp3s0: authenticate with 48:d3:43:c0:4e:cf
wlp3s0: send auth to 48:d3:43:c0:4e:cf (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 48:d3:43:c0:4e:cf (try 1/3)
wlp3s0: RX AssocResp from 48:d3:43:c0:4e:cf (capab=0x411 status=0 aid=3)
wlp3s0: associated
wlp3s0: Limiting TX power to 18 (21 - 3) dBm as advertised by 48:d3:43:c0:4e:cf
perf: interrupt took too long (4133 > 3921), lowering kernel.perf_event_max_sample_rate to 48250
perf: interrupt took too long (5167 > 5166), lowering kernel.perf_event_max_sample_rate to 38500
wlp3s0: authenticate with 48:d3:43:c0:4e:c9
wlp3s0: send auth to 48:d3:43:c0:4e:c9 (try 1/3)
wlp3s0: authenticated
wlp3s0: waiting for beacon from 48:d3:43:c0:4e:c9
wlp3s0: associate with 48:d3:43:c0:4e:c9 (try 1/3)
wlp3s0: RX AssocResp from 48:d3:43:c0:4e:c9 (capab=0x431 status=0 aid=4)
wlp3s0: associated
wlp3s0: authenticate with 48:d3:43:c0:4e:cf
wlp3s0: send auth to 48:d3:43:c0:4e:cf (try 1/3)
wlp3s0: authenticated
wlp3s0: waiting for beacon from 48:d3:43:c0:4e:cf
wlp3s0: associate with 48:d3:43:c0:4e:cf (try 1/3)
wlp3s0: RX AssocResp from 48:d3:43:c0:4e:cf (capab=0x411 status=0 aid=3)
wlp3s0: associated
wlp3s0: Limiting TX power to 18 (21 - 3) dBm as advertised by 48:d3:43:c0:4e:cf
wlp3s0: authenticate with 48:d3:43:c0:4e:c9
wlp3s0: send auth to 48:d3:43:c0:4e:c9 (try 1/3)
wlp3s0: authenticated
wlp3s0: waiting for beacon from 48:d3:43:c0:4e:c9
wlp3s0: associate with 48:d3:43:c0:4e:c9 (try 1/3)
wlp3s0: RX AssocResp from 48:d3:43:c0:4e:c9 (capab=0x431 status=0 aid=4)
wlp3s0: associated